Silicone Mold for Gaming Dice - Individual Polyhedral Dice Cap Slab Mold for Res
Want to make your own dice? Look no further!
These individual cap style molds are easy to use for beginners and pros alike!
The open faced, transparent, miniature slab style molds are the best for easy pouring-- you can see what you're doing and there is no need for pipettes!
The unique mushroom-style top and bottom fit ensures that you don't need to use tape or rubber bands to keep your mold together or keep resin from leaking out, and the anchors made it easy to line up! Flexible silicone guarantees longevity and won't crack like other stiff rubber molds. The resulting product is seamless, and the dice don't need to have sprues sanded off when they are finished curing. Simply peel, demold, and go!
Using the included instruction sheet, you can make dice in three easy steps! Fill the molds, line up the top and bottom pieces using the easy-to-see indentations, and gently press down. It's as easy as that!
These molds are for a standard 16mm polyhedral gaming dice set, similar to most commercially made dice. They are not sharp edged and very deep numbered like you might find with some 3D printed dice, and instead have a softer edge, shallower numbers, and require little to no sanding and polishing to use.
The silicone molds are smooth, degassed, and bubble-free. This ensures a glossy surface on every die face with no polishing required.**WHILE IT IS NOT NEEDED, IT IS RECOMMENDED TO USE A PRESSURE POT FOR A TRUE BUBBLE FREE RESIN CASTING. WITHOUT A PRESSURE POT, RESIN WILL ALWAYS HAVE SOME SMALL SURFACE/INTERIOR BUBBLES**
Check out some of our other listings for full set slab molds!