Silicone Mold for Gaming Dice -- Polyhedral Dice Slab Mold Sharp and Smooth Edge

Want to make your own dice? Look no further!
These slab style molds are easy to use for beginners and pros alike! 
The open faced, transparent slab style molds are the best for easy pouring-- you can see what you're doing and there is no need for pipettes! 
The keys and a hefty top piece ensures that you don't need to use tape or rubber bands to keep your mold together or keep resin from leaking out and the large grooves make it easy to line up for a perfect cast every time! Flexible silicone guarantees longevity and won't crack like other stiff rubber molds. The resulting product is seamless, and the dice don't need to have sprues sanded off when they are finished curing. Simply peel, demold, and go!
Using the included instruction sheet, you can make dice in three easy steps! Fill the molds, line up the top and bottom pieces using the easy-to-see indentations, and gently press down. It's as easy as that!
These molds are for a standard 16mm polyhedral gaming dice set, similar to most commercially made dice. There are two types: Sharp and Smooth. The Smooth dice have a softer edge with shallow numbers, like you might find with commercially made Chessex dice, for example, making them are a little trickier to paint than the Sharp dice. The Sharp molds do have slightly deeper numbers and a much crisper edge, making them slightly easier to paint-- these work very well for beginning casters! 
The silicone molds are smooth, degassed, and bubble-free. This ensures a glossy surface on every die face with no polishing required.
*DICE IN IMAGE NOT INCLUDED*
**WHILE IT IS NOT NEEDED, IT IS RECOMMENDED TO USE A PRESSURE POT FOR A TRUE BUBBLE FREE RESIN CASTING. WITHOUT A PRESSURE POT, RESIN WILL ALWAYS HAVE SOME SMALL SURFACE/INTERIOR BUBBLES**